These plugs are designed to simplify twisted pair terminations by allowing the wire pairs to be easily inserted through the plug and out of the front. This allows the installer to easily check the wiring order before crimping the connector. Twist is maintained more easily enabling a better performing crimp. Waste is minimised and the plugs are suitable for either stranded or solid wires.

​

Housing allows the cable further inside so that twist is maintained up to less than 3 mm from the contacts. 

​

​

​

​

​

​

​

​

 

 

 

 

 

 

 

​

​

​

​

​

​

​

Click here for drawing                       

 

​

Features

​

• Each plug allows twisted pair wires to be inserted through the body and pulled out of the front to ensure the correct wiring order before crimping
   

• By pulling the cores into the plug, twists can easily be maintained up to the contacts, enabling fully rated category performance

​

• Contact blades are suitable for stranded or solid wire cores from 24-26 AWG (0.51 - 0.40 mm),

with insulation up to 1.0 mm O.D. ​

​

• Suitable for Category 6 twisted pair terminations
   

• Perfect solution for rapid termination

​

• Suitable for termination of solid or stranded UTP cables with sheath O.D. of 5.0 - 6.0 mm.

​​

• Faults and failures minimised
   

• Simple one piece design
   

• Less cable scrap and wastage
   

• N.B. Must be used with suitable crimp tool (e.g., our code TRCSPDY)
   

  

Specifications

​

• Housing material: Polycarbonate UL94V-0
   

• Gold plating: 1.27µm/50µ”
   

• 3 prong contact for solid or stranded cores
   

• Housing colour: transparent
   

• Operating temperature: -10˚C to 60˚C

​

​

Product code: PXSPDY6

​

Packaging: supplied in poly bags of 10, then 100, then 500. Also available with reduced packaging as bags of 200
10:          PXSPDY6#10 
100:        PXSPDY6#100 

200:        PXSPDY6#200 (Supplied loose in bag)
500:        PXSPDY6#500 

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​