Contractor Grade Category 5e SPEEDY RJ45 plug

Our plugs are designed to simplify twisted pair terminations by allowing the wire pairs to be easily inserted through the plug and out of the front. This allows the installer to easily check the wiring order before crimping the connector. Twist is maintained more easily enabling a better performing crimp. Waste is minimised and the plugs are suitable for either stranded or solid wires.

PXSPDY5b

Click here for drawing

Features:

Each plug allows twisted pair wires to be inserted through the body and pulled out of the front to ensure the correct wiring order before crimping
By pulling the cores into the plug, twists can easily be maintained up to the contacts, enabling fully rated terminations compliant with the patch cord standard TIA-568-C.2
Three prong pin fits stranded or solid cores 23 – 26 AWG, with insulation OD 0.93 –1.04mm
Suitable for termination of UTP cables with sheath O.D. of 5.0 – 6.0mm
Perfect solution for rapid termination
Simple one-piece design
Less cable scrap and wastage
N.B. Must be used with suitable crimp tool (e.g., our code TRCSPDY or TRCSPDY4)

https://www.speedy-rj45.com/ratchet-crimp-tool-speedy-rj45

https://www.speedy-rj45.com/contractor-grade-crimp-tool

Specifications:

Weight (net weight including packaging)
PXSPDY5b#10: 16g
PXSPDY5b#100: 178g
PXSPDY5b#200: 304g
PXSPDY5b#500: 910g
PXSPDY5b#1000: 1534g
Dimensions (in primary packaging)
PXSPDY5b#10: 110 x 85 x 15mm
PXSPDY5b#100: 260 x 190 x 50mm
PXSPDY5b#200: 300 x 200 x 20mm
PXSPDY5b#500: 360 x 250 x 100mm
PXSPDY5b#1000: 370 X 260 X 80mm
Operating temperature: -10˚C to 60˚C
Housing colour: transparent
Housing material: Polycarbonate UL94V-0
3 prong, Copper alloy, 50µ”/1.27µm Gold plated contact for solid or stranded cores
Designed for use with flush strain relief boots PS6* and PSPDY6