top of page


These plugs are designed to simplify terminations by allowing the wire pairs to be easily inserted
through the plug and out of the front. This allows the installer to easily check the wiring order before
crimping the connector, minimising waste of time and materials. The contacts are suitable for either
stranded or solid cores.

PXSPDY12 - SPEEDY RJ12 plugs.jpg


  • Each plug allows wires to be inserted through the body and pulled out of the front to ensure the correct wiring order before crimping.

  • Contact blades are suitable for stranded or solid wire cores from 22‐26 AWG (0.65 –  0.40mm), with insulation up to 1.0mm O.D.

  • Perfect solution for rapid termination

  • Faults and failures minimised

  • Less cable scrap and wastage

  • Suitable for round or flat cordage



  • Materials:

  • Housing: Polycarbonate UL 94‐V0

  • Contact: 50μ“/1.27μm gold plated over nickel phosphor bronze

  • Working temperature: 25˚C ̴ 55˚C

  • Contact resistance: 30 milliΩ max.

  • Insulation resistance: DC 300V, 100 megaΩ min.

Supplied in polybags of 10 then 100 then 500
10: PXSPDY12#10
100: PXSPDY12#100
500: PXSPDY12#500

Click here for drawing
SPEEDY RJ12 illustrative image.jpg
bottom of page