top of page

Category 6 Shielded SPEEDY RJ45 plug

These plugs are designed to simplify twisted pair terminations by allowing the wire pairs to be easily inserted through the plug and out of the front. This allows the installer to easily check the wiring order before crimping the connector. Twist is maintained more easily enabling a better performing crimp. Waste is minimised and the plugs are suitable for either stranded or solid wires.

Housing allows the cable further inside so that twist is maintained up to less than 3 mm from the contacts. 








Click here for drawing                        



  • Each plug allows twisted pair wires to be inserted through the body and pulled out of the front to ensure the correct wiring order before crimping

  • By pulling the cores into the plug, twists can easily be maintained up to the contacts, enabling fully rated category performance

  • Contact blades are suitable for stranded or solid wire cores from 24-26 AWG (0.51 - 0.40 mm),

with insulation up to 1.0 mm O.D. 

  • Perfect solution for rapid termination

  • Suitable for termination of solid or stranded STP cables with sheath O.D. of 5.0 - 6.0 mm.

  • Faults and failures minimised

  • Simple one piece design

  • Less cable scrap and wastage

  • N.B. Must be used with suitable crimp tool (e.g. our code TRCSPDY or TRCSPDY3)



  • Material

    • Housing: Polycarbonate UL94V-0

    • Shielding: Nickel plated brass

  • Gold plating: 1.27µm/50µ”

  • 3 prong contact for solid or stranded cores

  • Housing colour: silver (shielded)

  • Operating temperature: -10˚C to 60˚C

Product code: PXSPDY6S

Packaging: supplied in poly bags of 10, then 100, then 500. Also available with reduced packaging as bags of 200 and 1000
10:          PXSPDY6S#10 
100:        PXSPDY6S#100

200:        PXSPDY6S#200 (Supplied loose in bag)
500:        PXSPDY6S#500

1000:      PXSPDY6S#1000 (Supplied loose in bag)



































Watch Now

Assembly video

Illustrative Image

bottom of page