Premier Category 5e SPEEDY RJ45 snagless plug
These anti-snag arc-latch feedthrough plug for Cat 5e unshielded cable combines two innovations in the same item. The now-established feedthrough design simplifies twisted pair terminations while at the same time twist is maintained, enabling a better performing crimp. The new snagless latch design avoids the need for an anti-snag from the strain relief boot; leads can more easily be removed from panels or sockets without the encumbrance of rubber boots. Strain relief boots can be omitted without risking snagging.
Features
-
Each plug allows twisted pair wires to be inserted through the body and pulled out of the front to ensure the correct wiring order before crimping
-
By pulling the cores into the plug, twists can easily be maintained up to the contacts, enabling fully rated category performance
-
Contact blades are suitable for stranded or solid wire cores from 24-26 AWG (0.51 - 0.40 mm),
with insulation up to 1.0 mm O.D.
-
Suitable for Category 5e twisted pair terminations
-
Perfect solution for rapid termination
-
Suitable for termination of solid or stranded UTP cables with sheath O.D. of 5.0 - 6.0 mm.
-
Faults and failures minimised
-
Simple one piece design
-
Less cable scrap and wastage
-
N.B. Must be used with suitable crimp tool (e.g., our code TRCSPDY5)
Specifications
-
Housing material: Polycarbonate UL94V-0
-
Gold plating: 1.27µm/50µ”
-
3 prong contact for solid or stranded cores
-
Housing colour: transparent
-
Operating temperature: -10˚C to 60˚C
Product code: PRLSPDY5
Packaging: supplied in a carton of 50
50: PXSPDY5#10
EAN: 5055386511591
Commodity code: 85444920
Country of origin: China