top of page

High Performance Category 6 SPEEDY RJ45 Plug, Shielded

High performance Category 6 shielded offset plugs. These plugs are designed to simplify twisted pair terminations by allowing the wire pairs to be easily inserted through the offset openings and out of the front. This allows the installer to easily check the wiring order before crimping the connector. Twist is maintained more easily enabling a better performing crimp.

                     Click here for a drawing

Product code: PXSPDY6Sc

Features

  • Contacts and openings are offset so as to maintain signal separation and achieve optimum “patch cord standard” Category 6 performance
     

  • Each plug allows twisted pair wires to be inserted through the offset pins and pulled out of the front to ensure the correct wiring order before crimping
     

  • By pulling the cores into the plug, twists can easily be maintained up to the contacts, enabling fully rated category performance
     

  • Contact blades are suitable for stranded or solid wire cores from 23‐26 AWG (0.57 – 0.40mm), with insulation up to 1.05mm O.D.
     

  • Suitable for termination of solid or stranded STP cables with sheath O.D. of 6.5 – 7.0mm
     

  • Faults and failures minimised
     

  • Simple one piece design

  • Less cable scrap and wastage
     

  • N.B. Must be used with suitable crimp tools (e.g. our code TRCSPDY3)
     

 

Specifications

  • Housing material: Polycarbonate UL94-V0
     

  • Contacts: Phosphor copper plated with 1.27µm/50µ” thick hard gold over nickel underplate on contact area
     

  • Shell: 80 µ”/2.03 µm nickel plated brass

 

 

Packaging

Supplied in polybags of 10 then 100 then 500
PXSPDY6Sc#10
PXSPDY6Sc#100
PXSPDY6Sc#500
 

                                                               

Speedy high performance Category 6 shielded RJ45 plug
SPEEDY RJ45 Logo
bottom of page