Category 6A Shielded Feedthrough Plug
Our plugs are designed to simplify twisted pair terminations by allowing the wire pairs to be easily inserted through the plug and out of the front. This ease‐of‐use is now available for Category 6A terminations with this patch cord standard plug.
Click here for a drawing
Product code: PGSPDY
Compliant with Category 6A patch cord standard. Also suitable for MPTL terminations using
appropriate horizontal cable.
Each plug allows twisted pair wires to be inserted through the body and pulled out of the
front to ensure the correct wiring order before crimping
By pulling the cores into the plug, twists can easily be maintained up to the contacts,
enabling fully rated category performance
Able to accommodate Category 6A with overall cable O.D. up to 7.2mm
Suitable for inner cores 23-24AWG with insulation 1.1 to 1.2mm O.D.
Perfect solution for rapid termination; faults and failures minimised; less cable scrap and
Simple one piece design with no soldering required
Material: Housing: Polycarbonate UL94V‐0
Shielding: Nickel‐plated brass
Gold plating: 1.27µm/50µ”
3 prong contact for solid or stranded cores
Operating temperature: ‐10˚C to 60˚C
Supplied in polybags of 10 then 200